Vac Trucks

Vac Truck Scales

Sentinel PS3

Wireless Wi-Fi monitor system

In the palm of your hand, the Sentinel monitor displays the vehicles real-time weight and its axle distribution within a radius of 300ft from the vehicle. With its 12 channels, the PS3 allows you to instrument a wide range of truck and or tractor/trailer configurations. In a flash the monitors pictogram displays axle weights and total GVW for your truck or tractor/trailer. 

 

Automatic sensor recognition makes this scale ideal for fleets since it allows for coupling of an unlimited number of semi- trailers without calibration or manipulation. Imagine the freedom to monitor weight from outside of the cab or while dropping and swapping trailers. 

Weight data is stored in the wireless transmitters attached to the vehicle, so the weight data always stays with the vehicle. The weight data can be transmitted to a printer or OBC wirelessly. Its wireless, maintenance free sensors need no batteries and operate off the vehicles 12-volt power supply. 

 

The Sentinel PS3 accommodates all types of suspensions or combination of suspensions. Cleral’s innovative sensor technology doesn’t use load cells and can be easily installed to most vehicles without modification in a very short time, usually between 2-4 hours depending on the suspension type. 

Vehicle compatibility

  • All vehicle types
  • All suspension types
  • No truck modifications required

Product advantages

  • Fully automated features
  • Wi-Fi Enabled
  • Displays load distribution via pictograms
  • Displays weight GVQ & individual axle(s)
  • Displays up to 12 channels
  • Margin of error is +/-1%
  • Data port and printing options (wireless module)
  • Improves safety
  • Reduced tire-wear
  • Eliminates over load fines
  • Ensures load optimization
  • Saves time reworking loading
  • Ideal for self-loading situations

Product specifications

Display

  • Monitor Location: Wireless monitor with dashboard mount
  • Mount Size: 9.2 X 5.7 X 3.8cm
  • Measuring Unit: Kilogram, pound, and ton. Gross or net display options.

MONITOR FEATURES

  • LCD Backlight; Built-in Wi-Fi; Pictogram library
  • Power Supply: Rechargeable lithium battery and 12-volt power adapter
  • Sensors Power Supply: 12-volt power (no battery)

Materials

  • Monitor: Protective rubber boot

Feature Details

  • Communication Range: 300ft
  • Resource Library: Pictograms of truck and trailer configurations

Reflex Chassis or trailer mounted weighing system

Weatherproof display, stand along trailer, basic weighing system, SIM compatible, all suspension types

The Reflex uses the same unique sensor technology that has been developed by Cleral for the transportation industry. Reflex can also be upgraded to the Reflex Pro to automate auxiliary axle groups on both trucks and trailers or can be used as a Suspension Intelligent Management System (SIM System) which is fully SPIF Compliant. 

 

The Reflex SIM is an onboard weighing system in addition to a powerful embedded computerized load distributor. It assesses the weight of each axle and then distributes the weight dynamically, according to regulations and or operating preferences, by controlling the air pressure of the auxiliary axle(s). 

 

Reflex regulates the air pressure according to a predetermined weight conditions. If the weight limit is met, Reflex will adjust the lift axle pressure to meet weight distribution regulations. Reflex will manage three groups of auxiliary axles independently. Each group can be individually parametrized to meets its technical requirements. All this is managed by Cleral’s SIM System and does not require the operator’s involvement. Installation time for the Reflex system will vary depending on the application.

 

Product Options: Reflex Basic, Reflex Pro, Reflex SIM

Vehicle compatibility

  • All vehicle types
  • All trailer types
  • All suspension types
  • Weather resistant display
  • Chassis or trailer display mounting

Product advantages

  • Fully automated features 
  • Wi-Fi Enabled
  • Manages axle suspension- Pro & SIM Models
  • Displays load distribution 
  • Margin or error is +/- .01%
  • Data port and computer options
  • Compatible with Sentinel wireless monitor
  • Improves safety
  • Vehicle handling
  • Reduced tire-wear
  • Eliminates over load fines and rework
  • Ensures load optimization
  • SPIF Compliant- SIM model

Product specifications

Display

  • Monitor Location: Exterior mounted
  • Monitor Size: W3.6” - H2.7” - D1.5”
  • Measuring Unit:Kilogram, pounds, and ton. Gross or net display options.
  • Monitor Features: Weather Resistant, LCD Backlight, Built-in Wi-Fi
  • Power Supply: 12 or 24 volts, Cable length: 20’ or 40’

Feature Details

  • Product Types: Basic, Pro or SIM
Share by: